Access Denied


You do not have permission to access this content.
To request access, please submit a support request here.

Distorted Scope Command Signal

PROBLEM

 

What can cause the command signal to appear distorted and choppy like in the image below while the active feedback looks correct (Figure 1)?

 

Figure 1 – Distorted Command Signal as shown on the Station Manager scope

 

 

ANSWER

 

One known cause is a bad processor board in the controller.

K
Keary is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.