QUESTION
What is required to convert a model 293.2X 115VAC hydraulic service manifold (HSM) with low and high solenoid control valves to 24VDC?
ANSWER
You will need a DIN connector, 24VDC coil, and a new label for each channel (Figure 1). The control valve body does not need to be replaced.
DIN Connector part number:
C | CONNECTOR-DIN TO AMPHENOL USED ON 24VDC |
Coil part number:
A | COIL-ELEC,24VDC,DIN 43650 CONN,SERIES 08 |
Label Part Number:
A | LABEL-VOLTAGE, 24 VDC, METALPHOTO |
Figure 1 – Locations of DIN Connector, Coil, and Label