PROBLEM
Operator gets a buffer overrun error on when running the Sine-on-Sine command but only a dependent PC on a PC per Station network. Lowering the system rate and changing the timed-data acquisition activity buffer size has no effect.
ANSWER
Go to Station Manager > Applications menu > Project Manager > Project Options:
Lower the Buffer Size to something lower than the System Rate (Figure 1).
Figure 1 – 793.39 Elastomer Command Sine-on-Sine Buffer Size
The System Rate can be found in the HWI Editor. To open the HWI Editor, go to:
Figure 2 – System Rate in the HWI Editor
Note: If you need to change the System Rate you must go to the File menu and select Save after then run System Loader.
Start > All Programs > MTS 793 Software > Tools > System Loader.