What is required to convert a model 293.2X 115VAC hydraulic service manifold (HSM) with low and high solenoid control valves to 24VDC?

QUESTION

What is required to convert a model 293.2X 115VAC hydraulic service manifold (HSM) with low and high solenoid control valves to 24VDC?

 

ANSWER

You will need a DIN connector, 24VDC coil, and a new label for each channel (Figure 1).  The control valve body does not need to be replaced.  

 

DIN Connector part number:

011-282-226 

CONNECTOR-DIN TO AMPHENOL USED ON 24VDC

 

Coil part number:

011-282-257 

COIL-ELEC,24VDC,DIN 43650 CONN,SERIES 08

 

Label Part Number:

057-130-001 

LABEL-VOLTAGE, 24 VDC, METALPHOTO

 

Figure 1 – Locations of DIN Connector, Coil, and Label

K
Keary is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.